The Church Revisited
On the advice of my tutors, I revisited my video of the church. I used my GoPro with the settings described above. I placed the monopod back away from the fence as I am conscious of people walking by and stealing my equipment. Unfortunately, this decision did make the fence visible in the video, and this takes away from the beauty of the church and sky. I also forgot to check that the external power supply was connected to the camera. When I came back at the end time, the camera had run out of battery and had terminated the time-lapse prematurely. This was a shame as the sky was very aesthetic. But reshooting this will enable me to get a better position for the camera, maybe using the shed roof so I don’t get the fence in the image and can crop to make the final video mostly about the sky. I want the sky to be the main feature of my video, as this is what my theme is about.
I also see all the mistakes I make as a learning tool. It is better to make lots of mistakes and learn through them whilst still having the support of my tutors.
Although my monopod looks wonky, it is straight with the church. One of the downsides with using a monopod is that it is not as sturdy as a tripod in the wind, and I did see some shaking of the images in my time-lapse. I need to either put it on a tripod or use the built-in stabilisation feature to make sure this doesn’t happen in my next shoot.
As I used time-lapse in my capture, I had to make it into a movie using Premiere Pro. I put all my time-lapse images into a folder, and the GoPro had already named them in sequential numbers.
Premiere Pro requires this to make a video from the images in the proper order. To do this, I opened Premiere Pro and made a new project. I selected the folder containing the images and selected only the first image. Next, click the options button at the bottom where the box next to "Image Sequence" will be unticked. Tick this box and then press import; this will then import all the images into Premiere.
Premiere Pro requires this to make a video from the images in the proper order. To do this, I opened Premiere Pro and made a new project. I selected the folder containing the images and selected only the first image. Next, click the options button at the bottom where the box next to "Image Sequence" will be unticked. Tick this box and then press import; this will then import all the images into Premiere.
After the images have been imported, you can change the FPS (frames per second) if you wish. I am happy with 25 fps, so I did not need to use this option.
This is one of the first images from the camera. It shows too much land and takes away from the beauty of the sky. I plan to change this in my reshoot.
I like this cropped version better. This image shows how small and insignificant we really are in this world. The image includes a church in the middle, which becomes more visible in later images as the church lights up. If we compare ourselves to the size of the church and then look at how scale is shown in these images, we can truly see our insignificance in this world. It also reminded me how our ancestors relied on the skies for all sorts of information, some factual and others not. This reminded me how nowadays we mostly forget the wonder that is constantly above us.
5th November Church View
I prepared for re-filming my church view. I changed from a monopod to a tripod for stability, and I made sure that the external power supply was plugged in and charging the GoPro. The reusable silicone food bag contains my power bank; this is my way to try and keep the rain out, with a hole where the wire comes out. It’s a 20,000mAh battery, so it has plenty of charge to last throughout shooting. This is my initial setup that I could reach from the ground to do.
My husband got up on the shed roof and repositioned the GoPro further back on the roof and, with my guidance, readjusted the GoPro as needed, as I would have found a way to accidentally fall off it. James had previously suggested shooting from the roof, as it makes sure the fence does not get in the way and I can still position it far enough away from the fence to hopefully deter any opportunists from being tempted to steal it.
I am really pleased with the angle I can get from the roof rather than the one I got from my previous shoot.
The circles on the lens in the second image are from the rain. It rained while the GoPro was waiting to start at its scheduled time. I really like the effect it has, and it dries over time.
I was really pleased with how the shoot went. Before sunset you can see some of the windmills on the right it looks like the the hands of a clock ticking signifying the passing of time. As it was the 5th November there were some fireworks in the sky, and you can see some of the flashes in the video.
I also like the way the clouds swirl and how the colour changes over sunset and the glow of the church dominate the picture with the lights of the surrounding hours turning on and off.
I imported the images into Premiere Pro as previously mentioned, but I noticed that when I did, not all the images had been imported. I looked through the names of the images to make sure I hadn’t forgotten to import some and noticed that when it got to AA9999.jpg, it changed to AB0001.jpg. I am assuming that Premiere does not recognise this as a continuation of the sequence, so I had to do a second import from that file, and it then picked up all the remaining ones.
Once imported, I watched the video through and decided I needed to change the speed in some places. I used the splicing tool to cut the movie up from 2 sections into 4. These cuts were made where I wanted to change the speed of the video.
I firstly put 150% on the first and the second clips and 80% on the third and fourth sections. I liked the effect, but the video was only 2.5 minutes long and I needed at least a 5-minute video. It was suggested to me that I should slow it down again to see if I could get around that time. I was originally against it as I thought the effect of the images would look awful, but I tried it again anyway. I slowed down each section by half. This gave me a running time of 5.22 minutes, and on the watch through I was delighted to see that what once were brief flashes that could be missed if you blinked at the wrong time became features—like the flash of fireworks that changes the colour of the sky briefly and an interesting, what can only be described as a, puff of smoke from the trees. It all really changed the film for the better.
I am planning another shoot for tonight, as the local cricket club will be holding their fireworks event. This should provide plenty of fireworks visible in the sky from multiple displays across the area.
I forgot to use my DJI Mic 2 to capture ambient sound during last night's shoot, but I have prepared it for tonight. I placed the transmitter inside a waterproof phone pouch with the opening facing downwards, hoping that leaving the bottom open will let enough sound through while keeping the microphone completely dry. I turned the transmitter gain up to +10 dB to ensure it captures subtle natural ambient sounds as well as any distant fireworks going off.
The DJI Mic 2 features 32-bit float internal recording. This means it can record onboard independently without needing to be connected to a receiver or camera, though you can also capture a secondary track if it is attached to a recording device. It has a battery life of about 6 hours on a full charge, which will provide more than enough audio material to pair with my 5- to 10-minute video. I decided not to attach the furry windshield (often called a 'deadcat'), as the pouch surrounding the microphone should buffer any wind noise while protecting it from rain.
6th November Church View
When I first looked through the footage, I did not like it. I felt the fireworks spoiled some of the ambience. However, after taking a fresh look at it this morning, I decided to leave the fireworks at the same speed as the rest of the movie rather than trying to make a feature of them or deleting them, as cutting them out left a noticeable gap in the footage.
I used the same speed settings as the previous day and night shoot, but I noticed that the windmill produced a visually different effect. In the earlier shoot, the blades looked as though they were steadily marking the passing of time, whereas in this recording they appeared completely out of sync, spinning backwards and forwards. This gave the film an unsettling, dystopian feel.
Because of this mood and the visual tone of the opening takes, I decided to make the first section of the film black and white up until dusk, bringing the colour back in during the sunset to enhance the visual shift from day to night.
Before setting up the colour transition, I also needed to straighten the horizon line. I turned on Safe Margins in the Program Monitor as a visual guide and adjusted the Rotation setting in Effect Controls by -2.0°.
To prevent the resulting black corners from being visible, I increased the Scale from 100.0% to 103.4%, making sure to apply these geometric corrections consistently across both clips.
To execute the colour transition, I added the Lumetri Colour filter to the clip, ensuring the play head was at the start of the footage. In Effect Controls, I created an initial keyframe by clicking the stopwatch next to Saturation and setting the value to 0.0.
When I went to place the keyframe where I wanted the colour to return, I realized the footage was split across two separate clips, which prevented a continuous transition. I solved this by selecting both clips, right-clicking, and choosing Nest to merge them into a single sequence.
After placing the keyframe for full colour (100.0), I found that the colour was bleeding back in too slowly across the entire sequence, which wasn't the effect I was after. To fix this, I added an intermediate keyframe placed close to the final colour keyframe and set its saturation to 0.0 as well. This held the monochrome effect throughout the early scene and forced a quick, targeted colour transition that mingled naturally with the changing light of the sunset. I was really pleased with the result.
I looked through the audio I recorded alongside the timelapse, but some of the files didn't have any sound on them. I’m unsure why this happened, as the audio files were there, but when I played them back there was just nothing there.
One clip that did work was when the fireworks were going off. Because I’d slowed down the timelapse, the original sound didn't match what was happening on screen at all. I had to go through and edit each firework to match every flash. At first, I tried speeding up the audio to match the video, but it made the bangs sound tinny and thin, and it stood out way too much against the rest of the sound. I tried adding more bass to balance it out, but it still sounded completely off.
In the end, I decided the only way it was going to sound right was to cut each individual bang from the original recording and line it up by hand with every visual burst of a firework.
About halfway through, I thought I’d try copying and pasting the last bang to make the job go a bit quicker. I did that all the way to the end, but listening back, it sounded monotone and repeated, it was obvious it wasn't natural. So, I deleted the duplicated bangs and went back to cutting them from the original audio.
I zoomed in as far as I could in Premiere Pro to line them up, but I found the audio kept wanting to snap to certain spots on the timeline rather than dropping exactly where I let go on the waveform.
I got them as close as I possibly could, and because I was zoomed right in, the sync is close enough that it works well on playback.
Once the fireworks were done, I was still left with a gap at the end because the firework recording wasn't long enough to cover the rest of the film. To fix this, I did another recording with my DJI mic at the bottom of my garden during sunset to capture similar ambient evening sounds. That recording worked great, and I was able to splice it onto the end, so the audio runs right through to the finish.
Akerman's use of long takes and shots that continue beyond what normal cinema would allow, even if they are boring or uncomfortable to watch, inspired me to keep parts of my shoot that I would normally have cut. I also plan to use sound to manipulate the passing of time in my shoot. I want the audience to believe that the shoot is running slower than it is. I will use normal speed ambient sound whilst the timelapse images speed by. The idea was taken from Lowery's film A Ghost Story (2017), where he uses light not only to speed up time but also to show a stark difference between the future and the past.
Voice Over for Slow Cinema Movie
I am going to put a voice over on parts of the video. I searched for folklore surrounding the time of year that the video was shot on, which was the 6th of November. Because it was a Saturday, the bonfire night display fell on that date. I felt drawn to the story of Samhainn, pronounced 'Sa-wayne'. This traditional Celtic festival celebrated the divide between the light and the dark. It also celebrates the end of the harvest and a time when the boundary between our world and others becomes weaker, thus allowing ancestors and fairies to roam. This was celebrated on the 1st of November with some of the festivities starting the night before. It is said that Samhainn was purposefully assimilated in the 8th century when All Hallows Day was moved from the 13th of May to the 1st of November.
There was also a tradition of bonfires or samhnagan ('sa-ow-nag-in') in Gaelic. These were lit as a form of protection against the evil spirits that would roam alongside the ancestors and fairies. It was meant to hold anything with evil intentions until the next day. There were also turnips that were carved with evil faces to scare off the fairies and ghosts, and candles were placed inside so that they could be seen from a distance. This research links to my slow cinema because I wanted to talk about traditions that were relevant to the time the movie was shot and that also linked to the fireworks that had happened in my movie. The first story about Samhainn and the change from light and dark echoes the sunset that happens during the video. The previously mentioned traditions have effortlessly made their way into the Old Hallows Eve or Halloween traditions. (Rodger, 2023)
https://blog.historicenvironment.scot/2023/10/samhainn-and-the-scottish-traditions-of-halloween/
Guy Fawkes and the foiled plot
Guy Fawkes was thought to have been converted to Catholicism by his stepfather after his father died. He and 13 other plotters, led by ringleader Robert Catesby, wanted to blow up Parliament to kill King James and his heir and install his young daughter Elizabeth, who was nine years old at the time, as queen and have a Catholic nobleman rule on her behalf, thus restoring Catholicism to the country. This plot was foiled as someone had sent a letter explaining their intent. Guy Fawkes, or John Johnson as he called himself when he was captured, was the explosives expert and was given the ill-fated job. He was found on a search ordered by King James on the 4th of November. I wanted to talk about Fawkes as it directly links to the fireworks and the traditional celebrations that were happening on the night in the movie.
Scrips for the voiceover
Daytime
Sunset
Samhainn ('Sa-wayne') is a traditional Celtic festival that celebrates the end of the harvest and the change between the light parts of the year and the darker coming months. This is also a time where the veil between our worlds is at its thinnest. Not only do the ancestors and fairies use this time to visit us the evils sprits come along too. To prevent this people would light bonfires or samhnagan ('sa-ow-nag-in') in Gaelic to cleanse the air and they would also carve turnips with evil faces to scare off the evil. This tradition appears to have
I felt drawn to the story of Samhainn, pronounced 'Sa-wayne'. This traditional Celtic festival celebrated the divide between the light and the dark. It also celebrates the end of the harvest and a time when the boundary between our world and others becomes weaker, thus allowing ancestors and fairies to roam. This was celebrated on the 1st of November with some of the festivities starting the night before. It is said that Samhainn was purposefully assimilated in the 8th century when All Hallows Day was moved from the 13th of May to the 1st of November.
There was also a tradition of bonfires or samhnagan ('sa-ow-nag-in') in Gaelic. These were lit as a form of protection against the evil spirits that would roam alongside the ancestors and fairies. It was meant to hold anything with evil intentions until the next day. There were also turnips that were carved with evil faces to scare off the fairies and ghosts, and candles were placed inside so that they could be seen from a distance. This research links to my slow cinema because I wanted to talk about traditions that were relevant to the time the movie was shot and that also linked to the fireworks that had happened in my movie. The first story about Samhainn and the change from light and dark echoes the sunset that happens during the video. The previously mentioned traditions have effortlessly made their way into the Old Hallows Eve or Halloween traditions. (Rodger, 2023)
Night after fireworks
English Folk Verse (c.1870)
The Fifth of November
Remember, remember!
The fifth of November,
The Gunpowder treason and plot;
I know of no reason
Why the Gunpowder treason
Should ever be forgot!
Guy Fawkes and his companions
Did the scheme contrive,
To blow the King and Parliament
All up alive.
Threescore barrels, laid below,
To prove old England's overthrow.
But, by God's providence, him they catch,
With a dark lantern, lighting a match!
A stick and a stake
For King James's sake!
If you won't give me one,
I'll take two,
The better for me,
And the worse for you.
A rope, a rope, to hang the Pope,
A penn'orth of cheese to choke him,
A pint of beer to wash it down,
And a jolly good fire to burn him.
Holloa, boys! holloa, boys! make the bells ring!
Holloa, boys! holloa boys! God save the King!
Hip, hip, hooor-r-r-ray!
PotW.org (2006)
Lyveden Exhibition
We were invited to exhibit at a forthcoming exhibition at Lyveden. This is not a project but an opportunity to show our work in a public space.
We visited Lyveden and I was able to to view the inside as this had been closed for restoration during my last project there. During my visit I found lots of photographic opportunities inside and some metal spiral stairs to an upper platform that gave you a view of the second floor or what was meant to be the first floor as the bottom was meant to be the servants quarters. I went round just photographing what caught my eye and after looking at the images I took, I was originally going to go with a few images and call my exhibit “Through Lyveden”.
Lyveden Alternative Processes: Digital Negatives & Cyanotype Exposure Testing
I showed my Lyveden images to James, and rather than using all of them, he suggested I might want to concentrate on a single strong image and produce cyanotypes, an alternative printing technique I have used successfully in previous projects. It also complements Lyveden as the way we mask part of the paper to make an image is making the paper resist the UV light, and this resistance is also a major part of Lyveden's building itself, with many parts of the building being designed to show resistance against being forced to change religion. I decided to make several cyanotypes using different methods, starting with the traditional cyanotype process.
For this initial print, I mixed equal parts of Solution A (Ferric Ammonium Citrate) and Solution B (Potassium Ferricyanide) under subdued lighting. I used a paintbrush to coat the paper evenly with the chemistry and hung it up with a peg to dry, using a fan on a low setting to speed up the drying process. The coated sheets were bone-dry and ready to expose after about 60 minutes.
To create the contact negative, I opened my selected Lyveden photograph in Adobe Photoshop, converted the image to black and white, and boosted the contrast using curves to ensure deep shadows and clear highlights. I then inverted the image to produce a negative and printed it directly onto an acetate transparency sheet.
I placed the acetate negative flat on top of the dried cyanotype paper underneath a piece of glass from a photograph frame to ensure direct, uniform contact and avoid soft edges. My initial exposure tests were unsuccessful because the Prussian blue tones were far too pale and underexposed under the UV light unit. To establish the correct exposure baseline, I conducted a systematic step test:
Attempt 1 (12 minutes): The image washed out during development, leaving a very weak, faint blue image.
Attempt 2 (15 minutes): The midtones started to form, but the shadow density was still lacking depth.
Attempt 3 (20 minutes): This exposure was fully successful. The chemistry received enough UV energy to produce rich, deep Prussian blues with clear highlight detail.
I then searched through my previous project notes for the exact quantities of materials needed to create variations in colour.
To fade the original Prussian blue cyanotype so I could tone it, I mixed 15g of soda crystals (sodium carbonate) in 1 litre of warm water to help them dissolve completely, pouring the solution into a standard photography developing tray. After thoroughly rinsing the exposed cyanotype until the wash water ran completely clear.
I submerged the print into the soda crystal bath. It only needed about 10 seconds. I left it in the bath until almost all the blue colours had stripped away, leaving a pale, faint yellow ghost image where the blue emulsion used to be. I then rinsed the paper thoroughly in clean running water to halt the bleaching reaction.
For the toning bath, I had previously prepared a concentrated tea solution using 1 litre of water heated to 60°C and 4 teabags left to brew.
I immersed the bleached print into the tea bath and left it for approximately one hour, allowing the natural tannins in the tea to bind with the remaining iron salts and stain the image. Once the desired warm sepia tone was achieved, I hung the print up with pegs and left it to dry. I chose to use tea as the tannins in it would stain the image to look like it could have been taken in the early days of photography. This gives the image an ambiance of what Lyveden once was.
After the tea toning was successful, I repeated the same bleaching process on another print but substituted the tea bath with madder root powder to produce warm reddish tones.
To prepare the botanical toner, I used warm water from the kettle again and placed two tablespoons of madder root powder into a fine sieve. I poured the warm water through the powder into a mixing vessel, allowing the sieve to rest submerged in the water without letting the fine sediment spill over into the liquid. I did this deliberately so I could easily strain out the plant matter once the colour had extracted, keeping the toning bath free of gritty particles that might cling to the wet paper emulsion.
Once the dye bath had fully infused, I transferred the madder root solution into a clean photography developing tray and submerged the bleached cyanotype. I left it to tone for around 30 minutes before thoroughly rinsing the print under cold running water and pegging it up to dry.
I chose to use madder root as I had used it before and had it in the house. I also wanted to achieve a similar feeling to the tea image, which I believe I achieved. I also feel the red reflects the love and commitment that Tresham had to his Catholic religion, and because of this he was willing to risk everything to still practice his chosen religion rather than adopt the Protestant religion that Queen Elizabeth I was forcing people to change to.
Lyveden Outcomes
AI Declaration
Artificial Intelligence (Gemini Notebook) was used as a supporting tool during the production of this portfolio to assist with spelling and grammar checks, refining document layouts, formatting Harvard citations, and exploring academic film vocabulary. All conceptual ideas, critical observations, film analyses, and creative decisions represent my own independent work.
References
A ghost story - David Lowery interview. (2017). [Video] Directed by Upbeat Entertainment. YouTube. Available at: https://www.youtube.com/watch?v=dpiHo9-WGLE [Accessed 22 Sept. 2026].
CinemaTyler (2021). Writer/director David Lowery reveals how he manipulates time [video essay]. [online] YouTube. Available at: https://www.youtube.com/watch?v=Aoh9o3ZHPqA [Accessed 22 Sept. 2026].
Davenport, R. (2022). I didn’t see you there. [Online film, Apple TV] Available at: https://tv.apple.com/movie/i-didnt-see-you-there [Accessed 30 Sept. 2026].
Ernst Busch, H. (2026). Jeanne Dielman, 23, Quai Du Commerce, 1080 Bruxelles (1975) multi subs film complet Chantal Akerman. [online] Vimeo. Available at: https://vimeo.com/1186319027 [Accessed 16 Sept. 2026].
Josh Vieth (2023). La région centrale (Michael Snow, 1971) - full film HD. [online] YouTube. Available at: https://www.youtube.com/watch?v=Q6YHm6kkEL8 [Accessed 16 Sept. 2026].
KADIST (n.d.). Making of monster.
Opening scene I satantango (1994). (2026). [Video] Directed by Scene Archive. YouTube. Available at: https://www.youtube.com/watch?v=W4VmK38xCjk [Accessed 22 Sept. 2026].
Stimpunks Foundation. (2024). Crip Time. [online] Available at: https://stimpunks.org/glossary/crip-time/ [Accessed 6 Oct. 2026].
“Our brand suddenly had a heartbeat the moment we saw the gallery.”
Recent Client“The shoot felt effortless, like hanging out with friends who happen to have cameras.”
Recent Client